CNC stepper motor Curve router machine JSS57P3N 3N.m 1000 rpm 4.2A best quality type black wholebody motor
Features:
1. Position error correction and never lose steps
2. Quick response and perfect acceleration, High torque at high speed
3. Automatic current adjustment based on load, lower temperature rising
4. Over-current, over-voltage and position ultra difference protection function
5. Pulses response frequency can reach 200KHZ
6. 16 kinds microsteps choice, highest 51200microsteps/rev
7. Support modbus RTU protocol on RS232, position and speed control controlled by communication;
8. Drive nema 23 series 2N.m integrated closed loop stepper motor
9. Voltage range: DC24V~48V
Microstep selection:
| Micorstep/rev | SW3 | SW4 | SW5 | SW6 |
| Default(400) | on | on | on | on |
| | | | | |
| | | | | |
| 6400 | on | on | off | on |
| 12800 | off | on | off | on |
| 25600 | on | off | off | on |
| 51200 | off | off | off | on |
| 1000 | on | on | on | off |
| 2000 | off | on | on | off |
| 4000 | on | off | on | off |
| 5000 | off | off | on | off |
| 8000 | on | on | off | off |
| 10000 | off | on | off | off |
| 20000 | on | off | off | off |
| 40000 | on | on | on | on |
Application
Suitable for all kinds of small and medium-sized automation equipment and instruments,
such as industrial robots, textile machinery, special industrial sewing machines, wire stripping
machines, marking machines, cutting machines, laser phototypesetting, plotters, CNC machine tools, engraving machines, automatic assembly equipment, etc. Excellent application
in devices where users expect low noise and high speed.
Motor Eelctrical Parameters:
| Mode | Step angle | Current (A) | Resistance (Ω±10%) | Inductance | Holding | Motor | Encoder | Weight(kg) |
| (mH±20%) | torque(N.m) | length(mm) | Resolution(PPR) |
| 57HSE1N-D25 | 1.8° | 4.2 | 0.4 | 1.2 | 1.2 | 88 | 1000 | 0.9 |
| 57HSE2N-D25 | 1.8° | 4.2 | 0.5 | 1.8 | 2 | 108 | 1000 | 1.3 |
| 57HSE3N-D25 | 1.8° | 4 | 0.9 | 4 | 3 | 144 | 1000 | 1.9
|
Motor Drawing
Package show
